1
．
Inspection
7
No.704-2010-01
(5) Reassembly
・
Version I type
・
Version II type
*The order of the packing and glass are different in the Version I type and Version II type.
Version I type
・
Version II type
Reassemble the cell unit. (Take care not to mistake the position packing(s) and O-
ring(s).)
Keep in mind that the screw will break if the connection of the 200-mm cell
and the 1-mm cell is fastened too much tightly. Fixing of components
(6) Attach the cell unit, tighten the screws fixing the optical system and finally retighten
the joint.
(7) After the power is turned on and all heaters are stabilized, adjust the voltages for the
optical system.
(It takes at least one hour to stabilize the temperature in the instrument.)
