Nikon AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR Repair Manual Download Page 68

Page: 68 / 109

- A21 ・ AF-S 28-300mm f/3.5-5.6G ED VR -

JAA80851-R.3811.A

#67×3

L-241

May.10.2012

•

Mount the 2nd lens-G straight ring unit.

Apply the adhesive to the threaded portion.

•

Tighten the three screws (#67).

•

Tighten the three screws (#67) with the torque driver (J11375).

2nd lens-G straight ring unit

With the roller (#130) being

kept up, fit it in U-shape

groove.

Fit the three straight

keys (B147) in the three

grooves.

Changed page

△

× 2

(Torque value: 18 cN.m)

△ (

Addition)

△ (

Revision)

Tightening torque= 18 cN

・

User ID:uncf8224

Summary of Contents for AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR














































































































Search results

Summary of Contents for AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR

Reviews:

Related manuals for AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR

Brands by name

Popular brands

Nikon AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR, Repair Manual

Search results

Summary of Contents for AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR

Reviews:

Related manuals for AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR

Brands by name

Popular brands