Nikon AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR Repair Manual Download Page 50

Page: 50 / 109

- A3 ・ AF-S 28-300mm f/3.5-5.6G ED VR -

JAA80851-R.3811.A

#102×3

#103 (A-G)×3

L-241

#103 (A-G)×3

#102×3

L-241

May.10.2012

•

Attach the three rollers (#103: selected from A to G) and three screws (#102).

•

Tighten the three screws (#102) with the torque driver (J15420).

Note: Select the appropriate roller (#103) depending on the straight groove width of the cam ring

(#38). (ref. page D4)

Apply

to the

threaded

portion.

Apply

to the

threaded

portion.

(Torque value: 15 cN.m)

△ (

Addition)

(Torque value: 15 cN.m)

△ (

Addition)

Changed page

△

× 4

Tightening torque= 15 cN

・

•

Attach the three rollers (#103: A-G) and three screws (#102).

•

Tighten the three screws (#102) with the torque driver (J15420).

Note: Select the appropriate roller (#103) depending on the cam groove width of the cam ring (#38).

(ref. page D4)

Tightening torque= 15 cN

・

△ (

Revision)

△ (

Revision)

User ID:uncf8224

Summary of Contents for AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR














































































































Search results

Summary of Contents for AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR

Reviews:

Related manuals for AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR

Brands by name

Popular brands

Nikon AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR, Repair Manual

Search results

Summary of Contents for AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR

Reviews:

Related manuals for AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR

Brands by name

Popular brands