Nikon AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR Repair Manual Download Page 66

Page: 66 / 109

- A19 ・ AF-S 28-300mm f/3.5-5.6G ED VR -

JAA80851-R.3811.A

#99

#130 (A-C)

#94 (A-G)

L-241

#129

B147 (A-D)×3

#148 (A-I)×3

May.10.2012

•

Attach the roller (#130: A-C), roller (#94: A-G), zoom coupling pin (#99), and screw (#129).

•

Tighten the screw (#129) with the torque driver (J15420).

Note: Select the appropriate roller (#94) depending on the cam groove width of the fixed tube unit

(B50) (ref. page D3), while the roller (#130) depending on the U-shape groove width of the

rotatory tube (#53) (ref. page D4).

•

Attach the three rollers (#148: selected from A to I) and three straight keys (B147: selected from A to D).

Note: Select the appropriate roller (#148) depending on the cam groove width of the cam tube (#24)

(ref. page D2), while the straight key (B147) depending on the straight groove width of the
fixed tube unit (B50) (ref. page D3).

Attach at the position where
the corner of the window of

[B50] is aligned with that of

the cutout of [#24].

Attach the roller at the position of
this illustration.

Apply to the threaded portion.

Changed page

△

× 2

(Torque value: 15 cN.m)

△ (

Addition)

Tightening torque= 15 cN

・

△ (

Revision)

User ID:uncf8224

Summary of Contents for AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR














































































































Search results

Summary of Contents for AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR

Reviews:

Related manuals for AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR

Brands by name

Popular brands

Nikon AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR, Repair Manual

Search results

Summary of Contents for AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR

Reviews:

Related manuals for AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR

Brands by name

Popular brands