Nikon AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR Repair Manual Download Page 72

Page: 72 / 109

- A25 ・ AF-S 28-300mm f/3.5-5.6G ED VR -

JAA80851-R.3811.A

#157

#54

#107

#25

B105

#179

J11366

EDB0011

Attach the focus key (#54) and plate spring (#157).
Tighten the screw (#107).

•
•

Insert the head of

[#54] into the straight

groove of [#25].

Rotate [#25] and move the straight groove

up to the position where the head of [#54]

can be easily inserted.

Straight groove

Attach the focus brush (B105) with the screw (#179) temporarily.
Rotate the gear unit (B2040) and set the focus index ring to infinity position. Then, insert the reference
pin (J11366)/

Align the round tip part of the brush with "

△

" mark.

Tighten the screw (#179).

•
•

Align the round tip part of

the brush with "

△

" mark.

Focus key

Focus brush

Rotate [B2040] up to the position

where [#54] can be easily inserted.

User ID:uncf8224

Summary of Contents for AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR














































































































Search results

Summary of Contents for AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR

Reviews:

Related manuals for AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR

Brands by name

Popular brands

Nikon AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR, Repair Manual

Search results

Summary of Contents for AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR

Reviews:

Related manuals for AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR

Brands by name

Popular brands