Chapter
4
Assembly
63
4
3
Wiring of the Cytodiagnostic Unit
This procedure is required for the 55i.
This procedure is optional for the 50i.
(1)
Remove the cover at the top of the
microscope arm.
(2)
For the 55i, insert the two cables for the
cytodiagnostic unit from the top of the arm
and lead them out through the opening at the
bottom of the arm.
For the 50i, insert the AC adapter cable and
the hand switch cable from the top of the arm
and lead them out through the opening at the
bottom of the arm.
(3)
Secure the two cables in place using the
guide at the back of the microscope as shown
to the right.
(4)
Replace
the
cover
For the 50i:
AC adapter and hand switch cable
For the 55i:
Signal cable (thin) (J-CY/SG) and power
cable (thick) (J-CY/PS)
Insert the cables into to the space
exposed by the removed cover
Wiring for the 55i
