Nikon 50i Instructions Manual Download

Page: 38 / 86

Chapter 3 Individual Operations

3.1 Power ON/OFF

3.1

Power ON/OFF

3.1.1

Microscope

To turn on the microscope, press the power switch
to the “|” position.

To turn off the microscope, press the power switch
to the “

◯

” position.

3.1.2

Cytodiagnostic unit

Depress the power switch to turn on the
cytodiagnostic unit.

Turning on the unit starts initialization and sets
the magnification of the cytodiagnostic unit to
the 10x setting.

The “10x” magnification indicator lights.

Press the power switch. The switch pops out, and
the cytodiagnostic unit is switched off.

The magnification indicator turns off.

3.1.3

Light source of the Epi-fl attachment (mercury lamp)

Refer to the operating manual provided with the mercury lamp power supply.

Always observe all warnings and precautions described in the manual.

Power switch

Magnification

indicator

Cytodiagnostic

unit power

switch

Summary of Contents for 50i























































































Search results

Summary of Contents for 50i

Reviews:

Related manuals for 50i

Brands by name

Popular brands

Nikon 50i, Instructions Manual

Search results

Summary of Contents for 50i

Reviews:

Related manuals for 50i

Brands by name

Popular brands