** Enter Setup
95
Exit Setup
Check Character Verification
A check character is optional for Interleaved 2 of 5 and can be added as the last character. It is a
calculated value used to verify the integrity of the data.
Disable:
The scanner transmits Interleaved 2 of 5 barcodes as is.
Do Not Transmit Check Character After Verification:
The scanner checks the integrity of all
Interleaved 2 of 5 barcodes to verify that the data complies with the check character algorithm. Barcodes
passing the check will be transmitted except the last digit, whereas those failing it will not be transmitted.
Transmit Check Character After Verification:
The scanner checks the integrity of all Interleaved 2 of 5
barcodes to verify that the data complies with the check character algorithm. Barcodes passing the check
will be transmitted, whereas those failing it will not be transmitted.
Disable
** Do No
t Transmit Check Character After Verification
Transmit Check Character After Verification
Note:
If the
Do Not Transmit Check Character After Verification
option is enabled, Interleaved 2 of 5
barcodes with a length that is less than the configured minimum length after having the check character
excluded will not be decoded. (For example, when the
Do Not Transmit Check Character After
Verification
option is enabled and the minimum length is set to 6, Interleaved 2 of 5 barcodes with a total
length of 6 characters including the check character cannot be read.)
Summary of Contents for HR11+ Aringa
