talech Ingenico iCMP Quick Start Manual Download

Page: 1 / 4

iCMP Device Setup

Powering Up

Enable Bluetooth™ on your iPad

Tap on the Settings app on your iPad,
select Bluetooth from the left menu and
turn the Bluetooth setting ON.

Power on the iCMP

The power button is located above the USB
charging port on the right side of the device.

Before pairing your iCMP with the iPad,
make sure you charge your iCMP device for
a minimum of 3 hours. A full charge takes
about 6 hours.

Settings

Micro USB charging port is
located on the right side of
the iCMP device, below the
power button

| Apple Pay is a registered trademark in the United States and other countries

Thank you for choosing talech and the Ingenico iCMP device.

This guide shows you how to set up, pair and configure your iCMP device and begin taking payments right

away. If you have any questions, you can contact talech support at [email protected] or 888.995.1998.

Summary of Contents for Ingenico iCMP

Page 1: ...g your iCMP with the iPad make sure you charge your iCMP device for a minimum of 3 hours A full charge takes about 6 hours Settings Micro USB charging port is located on the right side of the iCMP dev...

Page 2: ...ur iPad Use the F2 and F3 keys to find your iPad in the list of devices available for pairing Get your pairing PIN The iCMP Bluetooth device name and pairing PIN should be displayed on the screen BT P...

Page 3: ...g PIN Enter the pairing PIN on your iPad Your iCMP device should be paired with your iPad 4 talech Settings Select the Ingenico iCMP reader from the card swiper setting screen in the talech app talech...

Page 4: ...default card Hold iPhone within an inch of the contactless reader with finger held on Touch ID without pressing it Wait for slight vibration a check mark on screen and a beep for confirmation of paym...