Newland HR11+ Aringa, User Manual

Page: 50 / 193

** Enter Setup
Exit Setup 38
Good Read LED
Good Read LED Duration
Good Read LED Duration is programmable in 100ms increments from 0ms to 25,500ms. The default
duration is 100ms. To program this parameter, scan the
Good Read LED Duration barcode, the numeric
barcodes and the Save barcode.
Example: Set the good read LED duration to 500ms
1. Scan the Enter Setup barcode.
2. Scan the Custom Duration barcode.
3. Scan the numeric barcodes “5”, “0” and “0” from the “Digit Barcodes” section in Appendix.
4. Scan the
Save barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the Exit Setup barcode.
** Good Read LED ON Good Read LED OFF
** Short (100ms) Medium (200ms)
Long (300ms) Prolonged (400ms)
Custom Duration