Newland HR11+ Aringa, User Manual, Page: 74 / 193

** Enter Setup
Exit Setup 62
Set Custom Prefix
To set a custom prefix, scan the Set Custom Prefix barcode and the numeric barcodes representing the
hexadecimal value(s) of a desired prefix and then scan the Save barcode. Refer to the “ASCII Table” in
Appendix for hexadecimal values of characters.
Note: A custom prefix cannot exceed 11 characters.
Set Custom Prefix
Example: Set the custom prefix to “CODE” (HEX: 0x43/0x4F/0x44/0x45)
1. Scan the Enter Setup barcode.
2. Scan the Set Custom Prefix barcode.
3. Scan the numeric barcodes “4”, “3”, “4”, “F”, “4”, “4”, “4” and “5” from the “Digit Barcodes” section in
Appendix.
4. Scan the Save barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the Enable Custom Prefix barcode.
6. Scan the Exit Setup barcode.
AIM ID Prefix
AIM (Automatic Identification Manufacturers) IDs and ISO/IEC 15424 standards define symbology
identifiers and data carrier identifiers. (For the details, see the “AIM ID Table” in Appendix. If AIM ID prefix
is enabled, the scanner will add the symbology identifier before the scanned data after decoding.
** Disable AIM ID Prefix Enable AIM ID Prefix