** Enter Setup
21
Exit Setup
Auto Sleep
Auto Sleep allows the scanner in the Manual mode to automatically enter the light sleep mode if no
operation or communication is performed for a time period (user programmable). When the scanner is in
the light sleep mode, pressing the trigger or receiving command from the host device can awaken the
scanner.
** Enable Auto Sleep
Disable Auto Sleep
The parameter below specifies how long the scanner remains idle (no operation or communication occurs)
before it is put into the light sleep mode. It is programmable in 1ms increments from 0ms to 6,000ms. The
default setting is 500ms.
Time Period from Idle to Sleep
Example: Set the time period from idle to sleep to 1000ms
1. Scan the
Enter Setup
barcode.
2. Scan the
Time Period from Idle to Sleep
barcode.
3. Scan the numeric barcodes “1”, “0”, “0” and “0” from the “Digit Barcodes” section in Appendix.
4. Scan the
Save
barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the
Exit Setup
barcode.
Summary of Contents for HR11+ Aringa
