** Enter Setup
Exit Setup
68
Terminating Character Suffix
Enable/Disable Terminating Character Suffix
A terminating character can be used to mark the end of data.
A terminating character suffix can contain 1 or 2 characters.
Disable Terminating Character Suffix
**
Enable Terminating Character Suffix
Set Terminating Character Suffix
The scanner provides a shortcut for setting the terminating character suffix to CR (0x0D) or CRLF
(0x0D,0x0A) and enabling it by scanning the appropriate barcode below.
** Terminating Character CR (0x0D)
Terminating Character CRLF (0x0D,0x0A)
To set a terminating character suffix, scan the
Set Terminating Character Suffix
barcode and the
numeric barcodes representing the hexadecimal value(s) of a desired terminating character and then
scan the
Save
barcode. Refer to the “ASCII Table” in Appendix for hexadecimal values of terminating
characters.
Set Terminating Character Suffix
Example: Set the terminating character to LF (HEX: 0x0A)
1. Scan the
Enter Setup
barcode.
2. Scan the
Set Terminating Character Suffix
barcode.
3. Scan the numeric barcodes “0” and “A” from the “Digit Barcodes” section in Appendix.
4. Scan the
Save
barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the
Exit Setup
barcode.
Summary of Contents for HR11+ Aringa
