Newland HR11+ Aringa, User Manual

Page: 110 / 193

** Enter Setup
Exit Setup 98
Custom Transmit Delay per Character: This parameter is programmable in 5ms increments from 0ms
to 75ms. To set it, scan the Custom Transmit Delay per Character barcode, numeric barcode(s) that
represent a desired value and the Save barcode. The default value is 70ms.
Custom Transmit Delay per 12 Characters: To set this parameter, scan the Custom Transmit Delay
per 12 Characters barcode and a numeric barcode (0-7, which represent 0ms, 300ms, 400ms, 500ms,
600ms, 700ms, 800ms and 900ms, respectively). The default value is 500ms.
Custom Transmit Delay per Character Custom Transmit Delay per 12 Characters
Example: Set the transmit delay per character to 5ms
1. Scan the Enter Setup barcode.
2. Scan the Custom Transmit Delay per Character barcode.
3. Scan the numeric barcode “5” from the “Digit Barcodes” section in Appendix.
4. Scan the
Save barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the Enable Transmit Delay per Character barcode.
6. Scan the Exit Setup barcode.
Example: Set the transmit delay per 12 characters to 600ms
1. Scan the Enter Setup barcode.
2. Scan the Custom Transmit Delay per 12 Characters barcode.
3. Scan the numeric barcodes “4” from the “Digit Barcodes” section in Appendix.
4. Scan the
Save barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the Enable Transmit Delay per 12 Characters barcode.
6. Scan the Exit Setup barcode.