** Enter Setup
Exit Setup
22
Batch Mode
A trigger pull activates a round of multiple decode sessions. This round of multiple scans continues until
you release the trigger. Rereading the same barcode is not allowed in the same round.
Batch Mode
Decode Session Timeout
Decode Session Timeout:
This parameter sets the maximum time decode session continues during a
scan attempt. It is programmable in 1,000ms increments from 1,000ms to 15,000ms. When it is set to 0,
the timeout is infinite. The default timeout is 15,000ms.
To program this parameter, scan the
Decode
Session Timeout
barcode, the numeric barcodes and the
Save
barcode. To find the numeric barcodes, see the “Digit Barcodes” section in Appendix.
Decode Session Timeout
Example: Set the decode session timeout to 2,000ms
1. Scan the
Enter Setup
barcode.
2. Scan the
Decode Session Timeout
barcode.
3. Scan the numeric barcodes “2”, “0”, “0” and “0” from the “Digit Barcodes” section in Appendix.
4. Scan the
Save
barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the
Exit Setup
barcode.
Summary of Contents for HR11+ Aringa
