Neuralog NeuraJet17, User Manual

Page: 81 / 100

NeuraJet17 User Guide
© 2014… Neuralog
71
8 Appendix – Example of Setting up a Private Network
The following instructions provide an example of setting up your NeuraJet17 on a
private network. Your setup will be similar to this.
Required items:
•
NeuraJet17 with CFA
•
Computer with print driver installed
•
Crossover Cable
13
, or
•
Network switch box with cables
o
Network cable from printer to switch box
o
Network cable from computer to switch box
Setup instructions:
•
Plug computer and printer into port switch or use crossover cable.
•
Set up a Static IP on printer, FOR EXAMPLE:
o
IP: 192.168.155.70
o
Netmask: 255.255.255.0
o
Gateway: 0.0.0.0
PC Setup Instructions for Vista static IP:
•
Start > Control Panel > Network and Internet
•
Network and Sharing Center
•
Manage Network Connections
•
Right Click on the Local Area Connection > Click on properties
•
Go to Networking Tab > Highlight Internet Protocol Version 4 (TCP/IP v4)
•
Click properties
•
Click Use the following IP address, FOR EXAMPLE
o
IP Address: 192.168.155.71 (for the computer)
•
Click in the Subnet Mask field > it auto fills a mask
•
Click Use the following DNS server addresses
•
Click OK
•
Click OK/close again
•
Now the computer is setup on its own private network
13
A crossover cable is a special type of network cable that allows this type of communication. A “regular”
network cable will NOT work.