Neuralog NeuraJet17, User Manual

Page: 12 / 100

NeuraJet17 User Guide
© 2014… Neuralog
2
•
Control Connector – Connects CFA to print engine for control and power
signals.
•
Paper Sensor – Senses Paper present and sends signal to the printer.
•
Paper Guide Slider – Sliding lever that sets the width of the paper that the CFA
will accept.
•
Case – Housing for all components made from a combination of CAD-generated
plastic and machined pieces as well as sheet-rolled metal.
•
Connector Pins (2) – Pins on CFA that fit into printer and directly connect CFA
to print engine
•
Attachment Screws – Two screws that attach the CFA to the printer. May be
tightened and loosened by hand.
NeuraJet17 Continuous Form Attachment
The Continuous Form Attachment NeuraJet17C is manufactured by Neuralog and
comes attached to the NeuraJet17 print engine to allow for continuous form printing.
1.2.3 Paper Stacker
The Paper Stacker is attached to the front of the printer where the paper exits. It
consists of a tray and a diverter. The tray catches the continuous paper and allows the
paper to automatically fold into a stack. The diverters guide the paper into the tray. The
paper stacker can fold away into the printer cavity.
Paper Tray – The black metal paper tray pulls out of the printer into a position that
catches the paper.
Diverter Flap – The diverter flap guides the paper down into the tray and causes the
paper to fold.