Neuralog NeuraJet17, User Manual

Page: 22 / 100

NeuraJet17 User Guide
© 2014… Neuralog
12
Interface Type 10BASE-T/100BASE-TX
USB 2.0 Hi-Speed
Operating System Compatibility Windows 8 / 7 / Vista / XP /
Server 2012[2] / Server 2008 R2[2] /
Server 2003[2] / Server 2008[2]
Network Protocol Print LPD, RAW, WSD-Print (IPv4, IPv6)
TCP / IP Application Services HTTP, HTTPS, POP3 (Authentication for
SMTP), SMTP (IPv4), DHCP, BOOTP,
RARP, ARP+PING, Auto IP, WINS (IPv4),
Management SNMPv1, SNMPv3
Security IEEE802.1X, SNMPv3, HTTPS, IPSEC
NeuraJet17 Setup Options
A basic network setup example is provided in the Section 2.6 Setting up the Printer
Network Connection . The Section 2.7 Setting up the Printer for USB for will provides
further details on USB setup.
2.1.5 Troubleshooting NeuraJet17 Setup
When setup is complete, the NeuraJet17 should be in the Online state. The printer will
not go online in the following situations. Take the appropriate action.
Symptom/Message Action
The Top Cover is open Close the Top Cover
The Ink Tank Cover is open Close the Ink Tank Cover
The Printhead is not installed Please see “Installing the Printhead”.
Ink Tank is not installed Please see “Installing Ink Tanks”.
Power On Again…Feed Unit Error is shown
on the Display Screen
The Continuous Form Attachment may
not be properly installed. Cycle the
printer’s power. Check if the LED on
the CFA has power.
The Online lamp and Message lamp are
not lit (even once), and nothing appears on
the Display Screen Make sure the printer is plugged in
correctly. Check the connection at the
plug and electrical outlet.
If ‘ERROR’ is shown on the Display Screen Contact Neuralog Support
2.2 The Continuous Form Attachment
The Continuous Form Attachment (CFA)
2
is an accessory that comes pre-installed on
the NeuraJet17. It guides the paper into the printer, keeps the paper straight, and
allows the printer to start prints at Top of Form. It is unlikely that you will need to remove
the device. If you should need to remove and/or attach the CFA follow the instructions
below.
2
The Continuous Form Attachment, or CFA, is a printer accessory, part name NeuraJet17C.