Neuralog NeuraJet17, User Manual

Page: 30 / 100

NeuraJet17 User Guide
© 2014… Neuralog
20
2.6 Setting up the Printer Network Connection
There are many options for setting up your printer on a network. For the most simple
static address setup of your NeuraJet17 follow these steps. For other configurations,
please see your system administrator.
2.6.1 Obtaining Network Information
Before you can add the printer to your office network, you will need to obtain basic
network information.
•
Connect the printer to your network with a network cable, if not already done.
•
Obtain a static IP Address from your system administrator. Most companies
have a local area network with dynamic and static addresses. A static address
will insure there are no network conflicts with other devices. This can be done for
your company’s public network or you can create a private network visible only to
your machine.
•
Obtain your company’s Default Gateway. The gateway is the computer used for
DNS routing. (On some networks this step is optional. Ask your system
administrator.)
•
Obtain your company’s Subnet Mask. This is often 255.255.255.0. (On some
networks this step is optional. Ask your system administrator.)
2.6.2 Setting up the Printer
Enter the static IP Address, Default Gateway and Subnet Mask into the printer by
following these steps. Enter using the Operator Panel. Remember you can take the
printer out of sleep mode by pressing any button. You can also press the Online
button at any time to exit the current menu path.
•
Assign the chosen IP Address to your printer.
o
Menu
►►►►►►
(6)
4
Interface Setup
o
▼
EOP Timer
►
TCP/IP
o
▼
IP Mode
►
IP Setting
o
▼
IP Address
▼
__ __ __ __
- Enter the numbers for the IP Address
5
- OK button selects and unselects the slot
-
◄►
changes the number when selected
-
◄►
moves to the next slot
o
▲
When Done
4
This notation will be used to indicate number of times button should be pressed.
5
Slots will hold numbers 0..255. Use the arrow keys to select the correct numbers.