Neuralog NeuraJet17, User Manual

Page: 77 / 100

NeuraJet17 User Guide
© 2014… Neuralog
67
6.8.1 Paper does not load
Paper should automatically load into the CFA as soon as the operator places the edge
of the paper against the white drive rollers. The printer must be in the Online state for
paper to load. If the paper does not automatically load, check to see that the CFA is
turned on. Cycle the power on the printer and reload the paper.
6.8.2 Paper does not load in correct position
The paper should load into the CFA such that the edge of the paper is just inside the
printer. Contact Neuralog Support for help if the paper does not load correctly.
6.8.3 Cut is in the wrong location
The NeuraJet17 places the cut at the end of the print job at about 20 millimeters after
the paper perforation. If the cut is off, it may be that the CFA is not properly functioning.
Other causes may be that the paper is not properly loaded into the printer. Or paper not
certified by Neuralog may not function properly in the NeuraJet17 printer.