Neuralog NeuraJet17, User Manual

Page: 43 / 100

NeuraJet17 User Guide
© 2014… Neuralog
33
•
Select OK when done. These forms will now be selectable in the printer’s page
setup tab when you print. Select the correct form for Page Size: to match the width
of the paper you have loaded into your NeuraJet17.
The Form Name table above contains the standard log forms that you will create to work
with standard sizes of well log paper. It is also possible to create other sizes of custom log
forms and to create custom forms that can be used for special layout situations such as
centering a log print on a standard log paper size. For example, to center an 11 inch wide
print on 17-inch wide paper, create a special version of
Log 17 Inch Wide Paper , but
provide margins of 3.12 in for the left and right Margin. If you need further help with custom
log printing, contact Neuralog support.
NOTE: Once these Log forms are installed and shared on a print server, any clients
accessing the shared printer will automatically have access to the forms.
2.12 Installing and Using the Status Monitor
The NeuraJet17 printer also comes with a Status Monitor application which can be run
on any PC to provide status information about the printer. The Status Monitor is
particularly useful for USB installations where the Web Interface is not available.
Locate the status monitor on the installation CD or download from the Neuralog website.
The containing folder will be similar to SM-V4430-FC1 or SM-V4430x64-FC1 for 32-bit
or 64-bit installation, respectively. Run the Setup.exe installation program to install the
Status Monitor.
Once installed, the status monitor can be launched directly from the NeuraJet17 print
driver. To launch the Status Monitor:
•
Open the Print Driver on the PC.
•
From the Main Tab of the Print Driver, click the Status Monitor button.
The Status Monitor displays printer status, similar to the Printer’s Web Interface.
Information such as ink levels and job status can be obtained.