Neuralog NeuraJet17, User Manual

Page: 27 / 100

NeuraJet17 User Guide
© 2014…
Neuralog
17
page
3
. You will want your first page to NOT have an “in-fold” mark. That is, looking at
the back of the paper it should not have the mark.
The NeuraJet17 begins printing after 2 blank pages at the top of the paper you load.
The two blank pages at the beginning of each print are necessary to protect the
printhead. The end or tail cut is placed to minimize paper waste, while ensuring proper
folding. The tail of the log will have no more than 1 blank page in order to align the
paper correctly for the next print. In summary, once the paper has been properly loaded,
NeuraJet17 prints should never have more than 3 blank pages at any time: exactly 2 at
the start; and either one or zero at the tail of the print.
2.3.7 Paper Orientation
The NeuraJet17 printer prints on the TOP side of the paper. Be sure the marks on your
NeuraJet17 paper face down. If you have correctly loaded paper from the box, the
marks will be face-down and on the LEFT side, closest to the green LED on the CFA.
Marks are on underside of paper. Printing occurs on top side of paper.
Load first page with no mark for proper fold.
Once you have loaded the paper, NeuraJet17 will begin each print on the correct page.
It is only when manually loading paper that the operator needs to be mindful of the start
page. Also if the wrong start page was chosen, the printer is self-correcting and
subsequent prints will begin on the correct fold.
2.3.8 The Cut Placement
The NeuraJet17 cuts the continuous paper at the end of each print. The printer places
the cut at the end of the print job on the last page at about 20 millimeters after the paper
3
These marks appear on most continuous form paper; the industry standard is for the mark to be on the
“in-fold”.