Neuralog NeuraJet17, User Manual

Page: 23 / 100

NeuraJet17 User Guide
© 2014… Neuralog
13
2.2.1 Uninstalling the Continuous Form Attachment
If you should need to remove the CFA from the printer follow these steps.
1. Eject/Remove any paper and turn the printer power OFF.
2. Unscrew the two grey attachment screws (by hand or with a screw driver).
These screws are located underneath the CFA near the back. Keep the attach
screws in a safe place.
3. With two hands gently pull the CFA off the back of the printer.
4. Place the CFA on the table.
5. You may wish to replace the attachment screws in the printer for safe keeping.
Caution : Do not attempt to remove or install the Continuous Form Attachment from the
NeuraJet17 without powering OFF the printer.
Note : Do not attempt to power on the printer without the CFA attached. The
NeuraJet17 will not function properly without the CFA attached.
2.2.2 Reinstalling the Continuous Form Attachment
If you should need to reinstall the CFA follow these steps. The CFA should always be
handled with two hands. You should NOT attach or unattach the CFA to the printer
unless the printer’s power has been turned OFF.
1. With the printer power turned OFF, slide the CFA on to the back of the printer
aligning the two connector pins. (Remove attachment screws if you have stored
them on the printer.)
2. Make sure the CFA fits snugly onto the printer. When the screws are properly
aligned, the power and signal connectors are also aligned.
3. Reattach the attachment screws and hand tighten.
4. Power ON the printer only after the CFA has been properly installed.
Once the CFA is in place you can power ON the printer and move on to the next step.
Powering ON the printer without the CFA will result in an error state.
2.3 The Continuous Form (Well Log) Paper
Once the printer is setup and Online you can load paper. NeuraJet17 accepts the 4
standard sizes of paper provided by Neuralog, or it can print on your custom paper
between 8.5” and 17”. Follow these directions to load paper into NeuraJet17.
Remember that the network/USB connections and print drivers will need to be setup
before printing can actually begin.
Locate the paper that you wish to use; keeping in mind that continuous form paper is
quite heavy. Use caution when moving these large boxes of paper. Paper can be
completely removed from the box, or it can be pulled from the box it comes in, as long