Neuralog NeuraJet17, User Manual

Page: 32 / 100

NeuraJet17 User Guide
© 2014… Neuralog
22
•
You should see the following
o
Reply from xxx.xxx.xxx.xx: bytes=32
•
An unsuccessful network connection gives the result
o
Request timed out.
•
You can also enter the printers address into a browser window. A web-based
program with the printer status will display if the printer was successfully installed
on the network. This is discussed on the next page.
2.7 Setting up the Printer for USB
NeuraJet17 can also be used to print via USB. For best results, use a cable less than
10 feet in length. USB cables are limited by there their electrical design; longer cables
may have data transmission problems.
•
Connect the printer to your PC with a USB cable, if not already done.
•
There are no special USB instructions. When the print driver is installed,
connectivity can be verified.
2.8 Using your Printer’s Web Interface
A useful feature on your NeuraJet17 is the web server and pages it provides. Once
your network is successfully set up, you can use these pages to access your printer.
Much of the printer status accessed through the printer’s operator panel can also be
seen through these web pages.
•
Bring up a web browser window, such as Internet Explorer.
•
Type in the printer’s assigned IP address in the browser address bar. It is not
necessary to enter the http:// prefix.
•
If your printer is turned ON and the network connection set up properly, you will
see your printer’s interface web page.
From these pages you can monitor ink levels, as well as monitor the life span of other
printer parts. You can also set up contact and location information for your printer. A
link to the Neuralog website is also available under
Support Links .