Neuralog NeuraJet17, User Manual

Page: 47 / 100

NeuraJet17 User Guide
© 2014… Neuralog
37
•
Make sure you have the NeuraJet17 printer selected.
•
Click the Properties button.
•
Adjust the parameters on the
Main tab
or Keep the defaults.
•
Set the actual paper Width.
o
Select the Page Setup tab
o
Select the appropriate log paper from the Page Size width .
o
Select OK .
•
Now set up the Document Size.
o
Choose the Landscape Orientation. (horizontal documents only)
o
Choose Tile to a X b Pages (not Fit to Single Page)
o
Check Lock Aspect Ratio and set values to 100%. This will insure that
the log scale is correct.
o
Next Uncheck Lock Aspect Ratio .
o
Set the Height value to the width of the paper, less margins.
Example: For 11” paper, choose 10.50 in print Height. This will
give ¼ inch margins on each side.
The Width (actually the log length) will remain unchanged.
When these parameters have been correctly set, click OK. The horizontal document
will print. See Chapter 4 Printing Well Logs for further in-depth information about
printing logs.