Neuralog NeuraJet17, User Manual

Page: 44 / 100

NeuraJet17 User Guide
© 2014… Neuralog
34
2.13 Power Saver Mode
The printer automatically enters a Power Saver or Sleep mode to conserve power if it is
idle for a specific period (by factory default, five minutes), that is, if no print jobs are
received or buttons are pressed while all covers are closed.
You can specify the period before the printer enters Sleep mode in the
Sleep Timer
menu. If any print jobs are received when the printer is in Sleep mode (after it was
originally online), the printer goes online and prints the jobs.
o
Menu
►►►►►►►►
(8) System Setup
▼
o
►►►►►
(5) Sleep Timer
▼
-
◄►
to select the minutes
- OK to enter
o
Press Online to bring the printer back online.
The sleep timer may be set between 5 and 240 minutes. When in Sleep mode, you can
press any button except the
Power button to bring the printer online again.