Neuralog NeuraJet17, User Manual

Page: 34 / 100

NeuraJet17 User Guide
© 2014… Neuralog
24
•
Network: Choose Add a network printer for network.
o
The program will search for the printer. If the printer is found select it; or
you can click “the printer that I want isn’t listed” and then type in the IP
address.
If you choose to type in the IP address manually you will need to
indicate that this is a TCP/IP device and enter the address. A “port”
will be created through which your printer communicates.
You can optionally give this port a name, or let the program auto-
name it.
DO NOT check Query the printer and automatically select the driver
to use – You have a CD or download of the correct driver.
•
USB: Choose Add a local printer for USB.
o
Choose an existing USB port
•
In either case when you get to a screen asking you to find the driver, choose
Have Disk .
•
Select the location of the driver. The installation application will tell you the
location. Find a file similar to
o
2WQ512M.INF (32 bit)
o
6WQ512M.INF (64 bit)
•
Once your install or replace the driver, give your printer a name.
o
We recommend NeuraJet17 or similar to readily distinguish it from other
printers.
•
For a network installation you can optionally share the printer and
•
Print a test page to your NeuraJet17. You should see the standard Windows
Test Page print on the continuous paper loaded in the printer.
The NeuraJet17 Print Driver will install ready to print continuous form. DO NOT change
these default settings if you want to print continuous form.
2.10 Print Driver Setup
The NeuraJet17 will be ready to print with no changes to the printing preferences,
except selecting the width of the paper you have loaded in the printer. However there
are some settings the user should consider when printing logs.
Access the Control Panel and the properties of the printer. Printing Preferences and
Printing Defaults both have these values preset. Look over these settings. Except
where specifically stated, these selections should NOT be changed for printing
continuous form documents.
2.10.1 Printing Preferences Main Panel
Default settings are recommended for printing most well logs. The settings that may be
adjusted will be explained, along with the expected results.