Chapter 6. Managing Device Security
|
491
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Private Group Membership
To display the Private Group Membership page, click
Security
Traffic Control> Private
Group
Private Group Membership.
1.
Use
Group ID
to select the Group ID for which you want to display or configure data.
2.
Use
Port List
to add the ports you selected to this private group.
Table
6-99.
Field
Description
Group Name
This field identifies the name for the Private Group
you selected. It can be up to 24 non-blank characters
long.
Group Mode
This field identifies the mode of the Private Group
you selected. The modes are:
•
community
•
isolated
The group mode can be either “isolated” or
“community”. When in “isolated” mode, the member
port in the group cannot forward its egress traffic to
any other members in the same group. By default,
the mode is “community” mode that each member
port can forward traffic to other members in the same
group, but not to members in other groups.
