Chapter 4. Routing
|
255
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Advanced
.From the Advanced link, you can access the following pages:
• Static ARP Cache
on page
255
• ARP Table Configuration
on page
257
Static ARP Cache
To display the Static ARP Cache page, click
Routing
ARP
Advanced
ARP Create
.
ARP Static Configuration
Use this screen to add an entry to the Address Resolution Protocol table.
1.
Use
IP Address
to enter the IP address you want to add. It must be the IP address of a
device on a subnet attached to one of the switch's existing routing interfaces.
2.
Use
MAC Address
to specify the unicast MAC address of the device. Enter the address as
six two-digit hexadecimal numbers separated by colons, for example 00:06:29:32:81:40.
3.
Click
ADD
to add a new static ARP entry to the switch.
4.
Click
DELETE
to delete an existing static ARP entry from the switch.
5.
Click
APPLY
to change the MAC Address mapping to the IP. Configuration changes take
effect immediately.