Chapter 4. Routing
|
397
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Static Routes Configuration
To display the Static Routes Configuration page, click
Routing
IPv6 Multicast
Static
Routes Configuration
.
1.
Use
Source IP
to enter the IP Address that identifies the multicast packet source for the
entry you are creating.
2.
Use
Prefix Length
to enter the Prefix Length to be applied to the Source IPv6 address.
3.
Use
RPF Neighbor
to enter the IP address of the neighbor router on the path to the source.
4.
Use
Metric
to enter the link state cost of the path to the multicast source. The range is 0 -
255 and the default is 1. You can change the metric for a configured route by selecting the
static route and editing this field.
5.
Use
RPF Interface
to select the interface number from the drop-dead menu. This is the
interface that connects to the neighbor router for the given source IP address.
6.
Click
ADD
to add a new static route to the switch.
7.
Click
DELETE
to delete the multicast static routes selected.
