304
|
Chapter 4. Routing
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Stub Area Configuration
To display the Stub Area Configuration page, click
Routing
OSPFv3
Advanced
Stub
Area Configuration
.
1.
Use
Area ID
to enter the OSPF area ID. An Area ID is a 32 bit integer in dotted decimal
format that uniquely identifies the area to which a router interface connects.
2.
Use
Import Summary LSAs
to select enable or disable. If you select enable, summary
LSAs will be imported into areas. Defaults to Enable.
3.
Use
Default Cost
to enter the metric value you want applied for the default route advertised
into the stub area. Valid values range from 1 to 16,777,215. This value is applicable only to
Stub areas.
4.
Click
ADD
to configure the area as a stub area.
5.
Click
DELETE
to delete the stub area designation. The area will be returned to normal state.