160
|
Chapter 3. Configuring Switching Information
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
3.
Use
Admin Edge Port
to specify if the specified port is an Edge Port within the CIST. It
takes a value of TRUE or FALSE, where the default value is FALSE.
4.
Use
Port Path Cost
to set the Path Cost to a new value for the specified port in the
common and internal spanning tree. It takes a value in the range of 1 to 200000000.
5.
Use
External Port Path Cost
to set the External Path Cost to a new value for the specified
port in the spanning tree. It takes a value in the range of 1 to 200000000.
6.
Use
BPDU Filter
to configure the BPDU Filter, which filters the BPDU traffic on this port
when STP is enabled on this port. The possible values are Enable or Disable.
7.
Use
BPDU Flood
to configure the BPDU Flood, which floods the BPDU traffic arriving on
this port when STP is disabled on this port. The possible values are Enable or Disable.
8.
Use
Auto Edge
to configure the auto edge mode of a port, which allows the port to become
an edge port if it does not see BPDUs for some duration. The possible values are Enable or
Disable.
9.
Use
Root Guard
to configure the root guard mode, which sets a port to discard any superior
information received by the port and thus protect against root of the device from changing.
The port gets put into discarding state and does not forward any packets. The possible
values are Enable or Disable.
10.
Use
Loop Guard
to configure the loop guard on the port to protect layer 2 forwarding loops.
If loop guard is enabled, the port moves into the STP loop inconsistent blocking state instead
of the listening/learning/forwarding state.
11.
Use
TCN Guard
to configure the TCN guard for a port restricting the port from propagating
any topology change information received through that port. The possible values are Enable
or Disable.
12.
Use
Port Mode
to enable/disable Spanning Tree Protocol Administrative Mode associated
with the port or port channel. The possible values are Enable or Disable.
Table
3-56.
Field
Description
Auto Calculated Port Path Cost
Displays whether the path cost is automatically
calculated (Enabled) or not (Disabled). Path cost will
be calculated based on the link speed of the port if
the configured value for Port Path Cost is zero.
Hello Timer
Displays the value of the parameter for the CST.
Auto Calculated External Port Path Cost
Displays whether the external path cost is
automatically calculated (Enabled) or not (Disabled).
External Path cost will be calculated based on the
link speed of the port if the configured value for
External Port Path Cost is zero.
BPDU Guard Effect
Display the BPDU Guard Effect, it disables the edge
ports that receive BPDU packets. The possible
values are Enable or Disable.
Port Forwarding State
The Forwarding State of this port.
