462
|
Chapter 6. Managing Device Security
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Telnet
To display the Telnet page, click
Security
Access > Telnet
.
Telnet Authentication List
This page allows you to select the login and enable authentication list available. The login list
specifies the authentication method(s) you want used to validate switch or port access for the
users associated with the list. The enable list specifies the authentication method(s) you want
used to validate privileged EXEC access for the users associated with the list. These list can
be created by Authentication List page under Management Security.
1.
Use
Login Authentication List
to specify which authentication list to use when you login
through telnet. The default value is networkList.
2.
Use
Enable Authentication List
to specify which authentication list you are using when
going into the privileged EXEC mode. The default value is enableList.