Chapter 2. Configuring System Information
|
113
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
LLDP-MED
From the LLDP-MED link, you can access the following pages:
• LLDP-MED Global Configuration
on page
113
• LLDP-MED Interface Configuration
on page
115
• LLDP-MED Local Device Information
on page
116
• LLDP-MED Remote Device Information
on page
118
• LLDP-MED Remote Device Inventory
on page
121
LLDP-MED Global Configuration
Use the LLDP-MED Global Configuration page to specify LLDP-MED parameters that are
applied to the switch.
To display this page, click
System
LLDP
LLDP-MED
Global Configuration
. A screen
similar to the following displays.
1.
Use
Fast Start Repeat Count
to specify the number of LLDP PDUs that will be
transmitted when the protocol is enabled. The range is from (1 to 10). Default value of
fast repeat count is 3.
