62
|
Chapter 2. Configuring System Information
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
DHCP Relay
To display the DHCP Relay page, click
System
>
Services
>
DHCP Relay
. A screen similar to
the following displays.
DHCP Relay Configuration
1.
Use
Maximum Hop Count
to enter the maximum number of hops a client request can
take before being discarded. The range is (1 to 16). The default value is 4.
2.
Use
Admin Mode
to select enable or disable radio button. When you select 'enable' DHCP
requests will be forwarded to the IP address you entered in the 'Server Address' field.
3.
Use
Minimum Wait Time
to enter a Minimum Wait Time in seconds. This value will be
compared to the time stamp in the client's request packets, which should represent the time
since the client was powered up. Packets will only be forwarded when the time stamp
exceeds the minimum wait time. The range is (0 to 100).
4.
Use
Circuit ID Option Mode
to enable or disable Circuit ID Option mode. If you select
'enable' Relay Agent options will be added to requests before they are forwarded to the
server and removed from replies before they are forwarded to clients.
