Configure System Information
85
Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
The following table describes the LLDP-MED network policy information that displays on the
page.
Configure the LLDP-MED Port Settings
You can enable LLDP-MED mode on an interface and configure its properties.
To configure LLDP-MED settings for a port:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
password
field.
The default password is
password
. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
Table 21. LLDP-MED network policy information
Field
Description
Network Policy Number
The policy number.
Application
The media application type associated with the policy, which can be one of the
following:
•
Unknown
•
Voice
•
Guest Voice
•
Guest Voice Signaling
•
Softphone Voice
•
Video Conferencing
•
Streaming Video
•
Video Signaling
A port can receive multiple application types. The application information is
displayed only if a network policy TLV was transmitted from the port.
VLAN ID
The VLAN ID associated with the policy.
VLAN Type
Indicates whether the VLAN associated with the policy is tagged or untagged.
User Priority
The priority associated with the policy.
DSCP
The DSCP associated with a particular policy type.
