Configure Switching
176
Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
The value can be any number between 10 and 1000000 seconds. The default is 300.
7.
Click the
Apply
button.
Your settings are saved.
Add a Static MAC Address
You can manually add MAC addresses to the MAC address table. Such MAC addresses are
static MAC addresses.
To add a static MAC address:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch’s password in the
password
field.
The default password is
password
. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5.
Select
Switching > Address Table > Advanced > Static MAC Address
.
The page displays the Port List section and the Static MAC ADdress Table section.
6.
From the
Interface
menu, select the interface.
7.
In the
Static MAC Address
field, enter the MAC address.
8.
From the
VLAN ID
menu, select the VLAN ID that must be associated with the MAC
address.
9.
Click the
Add
button.
The static MAC address is added to the MAC address table.
