Configuring Routing
201
Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
•
Search by Interface
. Select
Interface
from the
Search
menu. Enter the interface
using the respective naming convention (for example, g1 or l1). Then click the
Go
button.
If the address exists, the entry is displayed.
7.
To clear the IPv6 neighbors on a selected interface or on all interfaces, click the
Clear
button.
8.
To refresh the page with the latest information about the switch, click the
Update
button.
The following table describes the nonconfigurable information displayed on the page.
Table 55. IPv6 Neighbor Table information
Field
Description
Interface
The interface whose settings are displayed in the current table row.
IPv6 Address
The IPv6 address of the neighbor or interface.
MAC Address
The MAC address associated with an interface.
isRtr
Indicates whether the neighbor is a router. If the neighbor is a router, the
value is True. If the neighbor is not a router, the value is False.
Neighbor State
The state of the neighbor cache entry. Following are the states for
dynamic entries in the IPv6 neighbor discovery cache:
•
Incmp
. Address resolution is being performed on the entry. A
neighbor solicitation message was sent to the solicited-node multicast
address of the target, but the corresponding neighbor advertisement
message is not yet received.
•
Reach
. Positive confirmation was received within the last Reachable
Time milliseconds that the forward path to the neighbor was
functioning properly. While in REACH state, the device takes no
special action as packets are sent.
•
Stale
. More than Reachable Time milliseconds elapsed since the last
positive confirmation was received that the forward path was
functioning properly. While in STALE state, the device takes no action
until a packet is sent.
•
Delay
. More than Reachable Time milliseconds elapsed since the last
positive confirmation was received that the forward path was
functioning properly. A packet was sent within the last
DELAY_FIRST_PROBE_TIME seconds. If no reachability
confirmation is received within DELAY_FIRST_PROBE_TIME
seconds of entering the DELAY state, send a neighbor solicitation
message and change the state to PROBE.
•
Probe
. Seeks a reachability confirmation by resending neighbor
solicitation messages every Retrans Timer milliseconds until a
reachability confirmation is received.
Last Updated
Time since the address was confirmed to be reachable.
