manualshive.com logo in svg

NetApp HCI, Manual

Share
Download
NetApp HCI Manual Download Page 39

Configuration option A: Two cables for compute nodes

The NetApp H410C, H610C, and H615C compute nodes support using two network cables for connectivity to
all NetApp HCI networks. This configuration requires that the storage, vMotion and any virtual machine
networks use VLAN tagging. All compute and storage nodes must use the same VLAN ID scheme. This
configuration uses vSphere Distributed Switches that require VMware vSphere Enterprise Plus licensing.

NetApp HCI documentation uses letters to refer to network ports on the back panel of H-series nodes.

Here are the network ports and locations on the H410C storage node:

Here are the network ports and locations on the H610C compute node:

Here are the network ports and locations on the H615C compute node:

This configuration uses the following network ports on each node:

Node

Network ports used

H410C

D and E

H610C

C and D

Summary of Contents for HCI












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands