•
Storage health checks made by the service
Use NetApp Hybrid Cloud Control to run Element storage health checks prior to upgrading storage
Using NetApp Hybrid Cloud Control (HCC), you can verify that a storage cluster is ready to be upgraded.
Steps
1. Open a web browser and browse to the IP address of the management node:
https://<ManagementNodeIP>
2. Log in to NetApp Hybrid Cloud Control by providing the storage cluster administrator credentials.
3. Click
Upgrade
near the top right of the interface.
4. On the
Upgrades
page, select the
Storage
tab.
5.
Click the health check
for the cluster you want to check for upgrade readiness.
6. On the
Storage Health Check
page, click
Run Health Check
.
7. If there are issues, do the following:
a. Go to the specific KB article listed for each issue or perform the specified remedy.
b. If a KB is specified, complete the process described in the relevant KB article.
c. After you have resolved cluster issues, click
Re-Run Health Check
.
After the health check completes without errors, the storage cluster is ready to upgrade. See storage node
upgrade
to proceed.
Use API to run Element storage health checks prior to upgrading storage
You can use REST API to verify that a storage cluster is ready to be upgraded. The health check verifies that
there are no obstacles to upgrading, such as pending nodes, disk space issues, and cluster faults.
Steps
1. Locate the storage cluster ID:
a. Open the management node REST API UI on the management node:
https://[management node IP]/inventory/1/
b. Click
Authorize
and complete the following:
i. Enter the cluster user name and password.
ii. Enter the client ID as
mnode-client
if the value is not already populated.
iii. Click
Authorize
to begin a session.
iv. Close the authorization window.
c. From the REST API UI, click
GET /installations
.
d. Click
Try it out
.
Summary of Contents for HCI
Page 95: ...NetApp HCI Resources page...
Page 308: ......
