4. Select
Remote Control > Console Redirection
.
5. Click
Launch Console
.
You might have to install Java or update it.
6. When the console opens, click
Virtual Media > Virtual Storage
.
7. On the
Virtual Storage
screen, click
Logical Drive Type
, and select
ISO File
.
8. Click
Open Image
to browse to the folder where you downloaded the ISO file, and select the ISO file.
9. Click
Plug In
.
10. When the connection status shows
Device#: VM Plug-in OK!!
, click
OK
.
11. Reboot the node by pressing
F12
and clicking
Restart
or clicking
Power Control > Set Power Reset
.
12. During reboot, press
F11
to select the boot options and load the ISO. You might have to press F11 a few
times before the boot menu is displayed.
You will see the following screen:
13. On the above screen, press
Enter
. Depending on your network, it might take a few minutes after you press
Enter
for the upgrade to begin.
Summary of Contents for HCI
Page 95: ...NetApp HCI Resources page...
Page 308: ......
