manualshive.com logo in svg

NetApp HCI, Manual

Share
Download
NetApp HCI Manual Download Page 241

•

System ports

: If you are using NetApp Hybrid Cloud Control for upgrades, you have ensured that the

necessary ports are open. See 

Network ports

 for more information.

•

Minimum BMC and BIOS versions

: The node you intend to upgrade using NetApp Hybrid Cloud Control

meets the following minimum requirements:

Model

Minimum BMC version

Minimum BIOS version

H300E, H500E, H700E

6.84.00

NA2.1

H410C

All versions supported (no
upgrade required)

All versions supported (no
upgrade required)

H610C

3.96.07

3B01

H615C

4.68.07

3B08.CO

H615C compute nodes must update BMC firmware to version 4.68 using the 

compute

firmware bundle 2.27

 to enable NetApp Hybrid Cloud Control to perform future firmware

upgrades.

A Redfish license is required for H300E, H500E, and H700E compute nodes to enable
NetApp Hybrid Cloud Control to perform future firmware upgrades. Contact NetApp
Support to get the license installed manually until a new compute firmware bundle
automates this process in a follow-on release.

For a complete matrix of firmware and driver firmware for your hardware, see 

this KB

article

 (login required).

•

BIOS boot order

: Manually change the boot order in the BIOS setup for each node to ensure 

USB

CD/DVD

 appears in the boot list. See this 

article

 for more information.

•

BMC credentials

: Update the credentials NetApp Hybrid Cloud Control uses to connect to the compute

node BMC. You can do this using either the NetApp Hybrid Cloud Control 

UI

 or 

API

. Updating BMC

information prior to upgrade refreshes the inventory and ensures that management node services are
aware of all hardware parameters needed to complete the upgrade.

•

Attached media

: Disconnect any physical USB or ISO before starting a compute node upgrade.

•

KVM ESXi console

: Close all open Serial-Over-LAN (SOL) sessions and active KVM sessions in the BMC

UI before starting a compute node upgrade.

•

Witness Node requirements

: In two- and three-node storage clusters, one 

Witness Node

 must be running

in the NetApp HCI installation at all times.

•

Compute node health check

: You have verified that the node is ready to be upgraded. See 

Run compute

node health checks prior to upgrading compute firmware

.

About this task

In production environments, upgrade the firmware on one compute node at a time.

For NetApp Hybrid Cloud Control UI or API upgrades, your ESXi host will be automatically placed in
maintenance mode during the upgrade process if you have the DRS feature and required licensing. The node
will be rebooted and after the upgrade process is complete, the ESXi host will be taken out of maintenance
mode. For USB and BMC UI options, you will need to place the ESXi host in maintenance mode manually, as
described in each procedure.

Summary of Contents for HCI












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands