manualshive.com logo in svg

NetApp HCI, Manual

Share
Download
NetApp HCI Manual Download Page 222

If you had previously disabled SSH functionality on the management node, you need to

disable SSH again

 on the recovered management node. SSH capability that provides

NetApp Support remote support tunnel (RST) session access

 is enabled on the

management node by default.

Upgrade a management node to version 12.2 from 11.1 or 11.0

You can perform an in-place upgrade of the management node from 11.0 or 11.1 to version 12.2 without
needing to provision a new management node virtual machine.

Before you begin

• Storage nodes are running Element 11.3 or later.

Use the latest HealthTools to upgrade Element software.

• The management node you are intending to upgrade is version 11.0 or 11.1 and uses IPv4 networking. The

management node version 12.2 does not support IPv6.

To check the version of your management node, log in to your management node and
view the Element version number in the login banner. For management node 11.0, the
VM memory needs to be manually increased to 12GB.

• You have configured an additional network adapter (if required) using the instructions for configuring a

storage NIC (eth1) in the management node user guide your product.

Persistent volumes might require an additional network adapter if eth0 is not able to be
routed to the SVIP. Configure a new network adapter on the iSCSI storage network to
allow the configuration of persistent volumes.

Steps

1. Configure the management node VM RAM:

a. Power off the management node VM.

b. Change the RAM of the management node VM from 12GB to 24GB RAM.

c. Power on the management node VM.

2. Log in to the management node virtual machine using SSH or console access.

3. Download the management node ISO for 

NetApp HCI

 or 

Element

 software from the NetApp Support Site to

the management node virtual machine.

The name of the ISO is similar to 

solidfire-fdva-<Element release>-patchX-

XX.X.X.XXXX.iso

4. Check the integrity of the download by running md5sum on the downloaded file and compare the output to

what is available on NetApp Support Site for NetApp HCI or Element software, as in the following example:

sudo md5sum -b <path to iso>/solidfire-fdva-<Element release>-patchX-
XX.X.X.XXXX.iso

Summary of Contents for HCI












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands