manualshive.com logo in svg

NetApp HCI, Manual

Share
Download
NetApp HCI Manual Download Page 189

•

Valid upgrade path

: You have checked upgrade path information for the Element version you are

upgrading to and verified that the upgrade path is valid.

NetApp KB: Upgrade matrix for storage clusters running NetApp Element Software

•

System time sync

: You have ensured that the system time on all nodes is synced and that NTP is

correctly configured for the storage cluster and nodes. Each node must be configured with a DNS
nameserver in the per-node web UI (

https://[IP address]:442

) with no unresolved cluster faults

related to time skew.

•

System ports

: If you are using NetApp Hybrid Cloud Control for upgrades, you have ensured that the

necessary ports are open. See 

Network ports

 for more information.

•

Management node

: For NetApp Hybrid Cloud Control UI and API, the management node in your

environment is running version 11.3.

•

Management services

: You have updated your management services bundle to the latest version.

You must upgrade to the latest management services bundle before upgrading your Element
software to version 12. If you are updating your Element software to version 12.2, you need
management services 2.14.60 or later to proceed.

•

Cluster health

: You have verified that the cluster is ready to be upgraded. See 

Run Element storage

health checks prior to upgrading storage

.

•

Updated BMC for H610S nodes

: You have upgraded the BMC version for your H610S nodes. See the

release notes and upgrade instructions

.

Upgrade options

Choose one of the following Element software upgrade options:

•

Use NetApp Hybrid Cloud Control UI to upgrade Element storage

•

Use NetApp Hybrid Cloud Control API to upgrade Element storage

•

Upgrade Element software at connected sites using HealthTools

•

Upgrade Element software at dark sites using HealthTools

If you are upgrading an H610S series node to Element 12.2 and the node is running a
version of Element earlier than 11.8, you will need to perform additional upgrade steps
(

phase 2

) for each storage node. If you are running Element 11.8 or later, the additional

upgrade steps (phase 2) are not required.

Use NetApp Hybrid Cloud Control UI to upgrade Element storage

Using the NetApp Hybrid Cloud Control UI, you can upgrade a storage cluster.

What you’ll need

• If your management node is not connected to the internet, you have downloaded the package from the

relevant location:

◦

Storage firmware package for NetApp HCI storage clusters

◦

Storage firmware package for SolidFire storage clusters running Element software

For potential issues while upgrading storage clusters using NetApp Hybrid Cloud Control and
their workarounds, see the 

KB article

.

Summary of Contents for HCI












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands