manualshive.com logo in svg

NetApp HCI, Manual

Share
Download
NetApp HCI Manual Download Page 207

Use NetApp Hybrid Cloud Control UI to upgrade storage firmware

You can use the NetApp Hybrid Cloud Control UI to upgrade the firmware of the storage nodes in your cluster.

What you’ll need

• If your management node is not connected to the internet, you have downloaded the package from the

relevant location:

◦

Storage firmware package for NetApp HCI storage clusters

◦

Storage firmware package for SolidFire storage clusters running Element software

For potential issues while upgrading storage clusters using NetApp Hybrid Cloud Control and
their workarounds, see the 

KB article

.

The upgrade process takes approximately 30 minutes per node.

Steps

1. Open a web browser and browse to the IP address of the management node:

https://<ManagementNodeIP>

2. Log in to NetApp Hybrid Cloud Control by providing the storage cluster administrator credentials.

3. Click 

Upgrade

 near the top right of the interface.

4. On the 

Upgrades

 page, select 

Storage

.

The 

Storage

 tab lists the storage clusters that are part of your installation. If a cluster is

inaccessible by NetApp Hybrid Cloud Control, it will not be displayed on the 

Upgrades

page. If you have clusters running Element 12.0 or later, you will see the current firmware
bundle version listed for these clusters. If the nodes in a single cluster have different
firmware versions on them or as the upgrade progresses, you will see 

Multiple

 in the

Current Firmware Bundle Version

 column. You can click 

Multiple

 to navigate to the

Nodes

 page to compare firmware versions. If all your clusters are running Element

versions earlier than 12.0, you will not see any information about firmware bundle
version numbers. This information is also available on the 

Nodes

 page. See 

View your

inventory

.

If the cluster is up to date and/or no upgrade packages are available, the 

Element

 and

Firmware Only

 tabs are not displayed. These tabs are also not displayed when an

upgrade is in progress. If the 

Element

 tab is displayed, but not the 

Firmware Only

 tab,

no firmware packages are available.

5. Choose from the following options and perform the set of steps that are applicable to your cluster:

Summary of Contents for HCI












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands