manualshive.com logo in svg

NetApp HCI, Manual

Share
Download
NetApp HCI Manual Download Page 174

Find more information

•

NetApp Element Plug-in for vCenter Server

•

NetApp HCI Resources Page

Upgrade your NetApp SolidFire all-flash storage system for Element 12.2

You can keep your SolidFire Element storage system up-to-date after deployment by
sequentially upgrading all NetApp storage components.

These components include management services, HealthTools, NetApp Hybrid Cloud Control (HCC), Element
software, management node, and (depending on your installation) the Element Plug-in for vCenter Server.

What you’ll need

• You are running management node 11.3 or later. Newer versions of the management node have a modular

architecture that provides individual services.

To check the version, log in to your management node and view the Element version
number in the login banner. If you do not have 11.3, see 

Upgrade your management

node

.

• You have upgraded your management services to at least version 2.1.326.

Upgrades using HCC are not available in earlier service bundle versions.

• You have ensured that the system time on all nodes is synced and that NTP is correctly configured for the

storage cluster and nodes. Each node must be configured with a DNS nameserver in the per-node web UI
(

https://[IP address]:442

) with no unresolved cluster faults related to time skew.

Steps

1.

Update management services from Hybrid Cloud Control

.

If you are updating management services to version 2.16 or later and you are running a
management node 11.3 to 11.8, you will need to increase your management node VM’s
RAM prior to updating management services.

You must update to the latest management services bundle before upgrading your
Element software.

2.

(Optional) Upgrade to the latest HealthTools

.

Upgrading HealthTools is only required if the management node and Element software
you are running is 11.1 or earlier. HealthTools are not required for performing Element
upgrades using NetApp Hybrid Cloud Control.

3.

Run Element storage health checks prior to upgrading storage

.

4.

Upgrade your Element software and storage firmware

.

5.

(Optional) Upgrade your Element storage firmware only

.

Summary of Contents for HCI












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands