manualshive.com logo in svg

NetApp HCI, Manual

Share
Download
NetApp HCI Manual Download Page 206

Find more information

•

NetApp Element Plug-in for vCenter Server

•

NetApp HCI Resources Page

Upgrade storage firmware

Starting with Element 12.0 and management services version 2.14, you can perform
firmware-only upgrades on your H-series storage nodes using the NetApp Hybrid Cloud
Control UI and REST API. This procedure does not upgrade Element software and
enables you to upgrade storage firmware outside of a major Element release.

What you’ll need

•

Admin privileges

: You have storage cluster administrator permissions to perform the upgrade.

•

System time sync

: You have ensured that the system time on all nodes is synced and that NTP is

correctly configured for the storage cluster and nodes. Each node must be configured with a DNS
nameserver in the per-node web UI (

https://[IP address]:442

) with no unresolved cluster faults

related to time skew.

•

System ports

: If you are using NetApp Hybrid Cloud Control for upgrades, you have ensured that the

necessary ports are open. See 

Network ports

 for more information.

•

Management node

: For NetApp Hybrid Cloud Control UI and API, the management node in your

environment is running version 11.3.

•

Management services

: You have updated your management services bundle to the latest version.

For H610S storage nodes running Element software version 12.0, you should apply D-patch
SUST-909 before you upgrade to storage firmware bundle 2.27. Contact NetApp Support to
obtain the D-patch before you upgrade. See 

Storage Firmware Bundle 2.27 Release Notes

.

You must upgrade to the latest management services bundle before upgrading the firmware
on your storage nodes. If you are updating your Element software to version 12.2, you need
management services 2.14.60 or later to proceed.

•

Cluster health

: You have run health checks. See 

Run Element storage health checks prior to upgrading

storage

.

•

Updated BMC for H610S nodes

: You have upgraded the BMC version for your H610S nodes. See

release notes and upgrade instructions

.

For a complete matrix of firmware and driver firmware for your hardware, see 

this KB article

(login required).

Upgrade options

Choose one of the following storage firmware upgrade options:

•

Use NetApp Hybrid Cloud Control UI to upgrade storage firmware

•

Use NetApp Hybrid Cloud Control API to upgrade storage firmware

Summary of Contents for HCI












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands