NEC VERSA 6000 Series Manual Download Page 97

Page: 97 / 158

Using Your NEC Versa 6000 4-35

Serial Devices

To install a serial device such as a printer or an external modem, you need a
cable with a female 9-pin connector.

NOTE

When you connect a printer, be sure to install the appropriate

printer driver through the Windows Control Panel.

Follow these steps to connect a serial device to your NEC Versa 6000.

Check that both the NEC Versa and the device power are off.

Open the port cover on the back of the system and locate the serial port.

Align and connect the 9-pin connector with the serial port on the system.
Secure the connection with the screws provided.

Align and connect the other end of the cable to the appropriate port on
the device. Secure the connections with the screws provided.

Connecting a serial device

Summary of Contents for VERSA 6000 Series































































































































































Search results

Summary of Contents for VERSA 6000 Series

Reviews:

Related manuals for VERSA 6000 Series

Brands by name

Popular brands

NEC VERSA 6000 Series, Manual

Search results

Summary of Contents for VERSA 6000 Series

Reviews:

Related manuals for VERSA 6000 Series

Brands by name

Popular brands