NEC VERSA 6000 Series, Manual

Page: 52 / 158

Using Setup 3-3
■
Item-Specific Help
The right part of the screen. This area describes each parameter and its
available settings.
■
Key Status Bar
The bottom part of the screen. These lines display the keys available to
move the cursor, select a particular function, and so forth.
Using Keys
The following table lists Setup keys and their functions.
Setup Key Functions
KEY WHAT IT DOES
← →
Chooses a selection from the menu bar.
Home/End Moves to the first/last parameter on the current screen.
PgUp/PgDn Displays the previous/next page of the current screen if
scrollable.
↑ ↓
Moves the cursor between the displayed parameters.
Enter Displays additional fields for parameters marked with a .
Tab For some parameter settings, moves the cursor between the
subfields. For example, for System Time, Tab moves the
cursor from hour to minute to second.
–/+
Selects the next lower/higher setting. (Same as F5/F6.)
F5/F6
Selects the next lower/higher setting. (Same as
–/+.)
F9 Selects the default settings for the displayed parameters only.
F10 Selects the settings of the displayed parameters as they were
upon entering the screen.
Esc Displays the Exit screen.
F1 Displays the General Help screen.