Using Your NEC Versa 6000 4-31
■
NEC Versa 6000 DC car adapter.
See the following sections for steps on using the options.
External Monitor
You can add a standard external monitor to your NEC Versa 6000. You
need a display signal cable (usually provided with the monitor). One end of
the cable must have a 15-pin connector for the system.
Follow these steps to connect an external monitor to your NEC Versa 6000.
1.
Check that the NEC Versa is in Suspend mode or powered off and the
monitor power switch is turned off.
NOTE
The NEC Versa must be in Suspend mode or powered off
while the monitor is being connected.
2.
Open the port cover on the back of the system.
3.
Attach the 15-pin cable connector to the monitor port on the system. Se-
cure the cable connection with the screws provided.
Summary of Contents for VERSA 6000 Series
Page 9: ...viii Contents ...
